MINNID SUPPORT
Good questions. Clear answers.
How much does the minnid VAN system cost?
Our example component combinations start between 2.758,00 € and 3.958,00 € including VAT. Vehicle-specific mounting, electrics, delivery and installation are additional. The configurator shows the price of your selection. Plan your system ↗
What do I do with my current towbar?
Your existing towbar must be removed during installation. Depending on your vehicle, the Minnid system can be equipped with a removable towbar if you also need to tow a trailer. Check compatibility in the configurator or ask us.
Do I need an electrical kit?
You need suitable wiring for the system’s lights. An existing towbar wiring kit can usually be reused as long as it is compatible with LED lights. Your installer can check this.
Can both rear doors still open after the system is installed?
Yes. The swing carrier preserves access to the rear doors. Follow the operating instructions and check clearance around your vehicle before opening the carrier.
How heavy can the scooter be for the motorcycle rail?
Carry MB has a maximum motorcycle payload of 130 kg, subject to your vehicle and system limits. The carrier weighs 25 kg excluding the ramp. Carry the ramp inside the vehicle to preserve the motorcycle load allowance. Check your actual motorcycle weight and follow the Carry MB manual.
Which straps do I need for the motorcycle rail?
Use suitable motorcycle tie-down straps and compatible fittings for the rail’s airline attachment points. Straps are not included. Follow the Carry MB manual and the strap manufacturer’s instructions.
Which vehicles can use the system?
We support 22+ vehicles and continue to add more. For vehicles not listed, we can usually create custom adapters; contact us to confirm suitability. Explore supported vehicles.
Will my fat bike fit on the system?
Check tyre width, wheel dimensions, frame fit and bicycle weight against the Carry specification. Contact us with your bicycle details if you are unsure; tyre width alone does not confirm compatibility.
Do I need TÜV approval for the system?
Ask your installer which approval documents and any vehicle-registration steps apply to your particular installation and country. Contact us for the documentation for your vehicle and system.
What do I do with my parking sensors?
Parking sensors can be transferred to the new swing carrier. Select the sensor-transfer option in the configurator or discuss it with your installation partner.
How many bicycles can I transport with the minnid system?
Suitable combinations with Base XT carry up to four bicycles or e-bikes. Alternatively, combine two bicycles with a luggage box. Your vehicle, modules and available payload determine the permitted setup.
Is the swinging bracket installed instead of the bumper?
The bumper remains in place. The swing carrier is installed behind it, using the vehicle-specific mounting components.
Where can I have the system installed or view it?
Arrange installation or a viewing with Minnid or an installation partner. Contact us to confirm availability at your preferred location. Find a partner · Contact us
